• Home
  • List of Papers
  • Development of Sinter Diffusion Bonding for Rotor Core of Hybrid Car

Development of Sinter Diffusion Bonding for Rotor Core of Hybrid Car

Abstract

This research focused on composite technology to bond materials for rotor cores, which require both magnetic properties and mechanical properties at once, and analyzed diffusion bonding of sintered material and the bonding area as a factor affecting it.As a result, it was determined that the strength of the bonding zone depends on the bonding area, and diffusion bonding was verified as an applicable technique for bonding magnetic material and structural material, which are different materials. This report describes the establishment of a sinter diffusion bonding technique that provides satisfactory bonding strength. This was accomplished by improving the bonding area through application of pressure by press fitting of the inner and outer components, which was in addition to the difference in thermal expansion of the sintered material. Application of the developed material to rotor cores for use in hybrid cars has made it possible to achieve both functionality and strength, to significantly improve productivity, and to reduce costs by 50%.

References

  1. (1) Japan Powder Metallurgy Association, ed.: Sintered Machine Parts, Tokyo, Gijutsu Shoin, 1987, p. 279.
  2. (2) Fujiki, A.: “Development of sintered parts and materials for high-performance engines,” Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 46, No. 5, 1999, pp. 510–518.
  3. (3) Otsuka, E., Ikushima, A., trans.: Introduction to Chemistry of Materials 3: Mechanical Properties, Tokyo, Iwanami Shoten, 1965, p. 26.
  4. (4) Asaka, K.: “Research in diffusion bonding methods for combining green compacts,” degree thesis, Hiroshima University, 1997, pp. 61–62.
  5. (5) Shimada, A., Ogawa, H., Nakajima, M., Shimada, H.: “Development of an ultra-thin DC brushless motor for the Insight hybrid car,” Honda R&D Technical Review, Vol. 12, No. 1, 2000, pp. 15–20.

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.14 No.1 (257 - 264)

PDF

PDF 670KB

Citation Information

Toshiyasu KOMATSU, Satoru SHINZAKI, Youichi NAKAHARA, Kazuo ASAKA.
Development of Sinter Diffusion Bonding for Rotor Core of Hybrid Car
Honda R&D Technical Review Vol.14 No.1 pp.(257 - 264)2002.
Copy citation information
Copied