• Home
  • List of Papers
  • Practical Application of Combustion Simulation Using CFD for Two-wheeled Vehicle Small Engine

Practical Application of Combustion Simulation Using CFD for Two-wheeled Vehicle Small Engine

Abstract

The Computational Fluid Dynamics simulation of the flame propagation phenomena in a cylinder is carried out to visualize the combustion condition in small displacement, high-speed 4-stroke motorcycle engine. For verifying the simulation results, steady-state in-cylinder flow, fuel injection behavior, and flame propagation behavior were compared. Each experimental result verify the simulation results well, it is validated that the CFD simulation is one of the effective and useful tools to visualize the inside of the cylinder of the engine. This CFD visualizing technology is applied to study of combustion condition of commercial motorcycle engine, and clarified that the technology is effective to reduce the fuel consumption and expand the lean combustion limit. This technology is applied to development of 4-stroke 50cm3 PGM-FI Engine.

References

  1. (1) Sasaki, T., Yoshida, K., Urata, Y., Ohno, T., Ishii, K.: Introduction of Optically Access Engine to Investigate in Cylinder Phenomena, HONDA R&D Technical Review, Vol. 10, p. 78-89 (1998)
  2. (2) Yamada, T.: Current Status of Development and Application of CFD, ENGINE TECHNOLOGY, Vol. 04, No. 05, p. 10-11 (2002)
  3. (3) Sadakane, S., Abe, S.: Present and Future of Direct Injection Gasoline Engine, Journal of Society of Automotive Engineers of Japan, Vol. 57, p. 49-50 (2003)
  4. (4) Naitoh, K., Itoh, T., Takagi, Y., Kuwahara, K.: Large Eddy Simulation of Turbulent Premixed-Flame in Engine by Using the Multi-Level Formation, JSME, B, 59-559, p. 289-295 (1993)
  5. (5) Miyagawa, H., Kojima, S., Katsumi, N., Ueda, T., Okumura, T.: Numerical Analysis of the Effects of Squish Geometry on a Newly Developed 4-Valve Gasoline Engine Combustion Process, International Symposium COMODIA 98, p. 227-232 (1998)
  6. (6) Dokowicz, J. K.: Particle-Fluid Numerical Model for Liquid Spray, J. of Computational Physics 35, p. 229-253 (1980)
  7. (7) O’Rourke P. J., Amsden A. A.: The Tab Method for Numerical Calculation of Spray Droplet Breakup, SAE Paper 872089 (1987)
  8. (8) Magnussen, B. F.: On the Structure of Turbulence and a Generalized Eddy Dissipation Concept for Chemical Reactions in Turbulence Flow, 19th AIAA Sc. Meeting(1981)
  9. (9) Takahashi, Y., Murakami, Y.: Establishment of an Intake Port Design Support Tool Using CFD, Honda R&D Technical Review, Vol. 15, No. 1, p.104 (2003)
  10. (10) Philipp, H., Plimon, A., Femitz, G., Hirsch, A., Fraidl, G., Winklhofer, E.: A Tomographic Canera System for Combustion Diagnostics in SI Engines, SAE Paper 950681 (1995)
  11. (11) Kaneko, M., Kato, S., Saisyu, Y.: Combustion Control Technologies for SI Engines by Controlling Tumble Generation and Dispersion, The 17th Internal Combustion Engine symposium, Japan (2002)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.16 No.1 (235 - 242)

PDF

PDF 639KB

Citation Information

Yasuo MURAKAMI, Hitoshi KUROSAKA.
Practical Application of Combustion Simulation Using CFD for Two-wheeled Vehicle Small Engine
Honda R&D Technical Review Vol.16 No.1 pp.(235 - 242)2004.
Copy citation information
Copied