Development of Air Supply System for CLARITY FUEL CELL

Abstract

A compact air supply system has been developed for the CLARITY FUEL CELL fuel cell system in order to make it possible to fit the system under the front hood of the vehicle. The use of a motorized turbo compressor realizing greater quietness than a conventional Lysholm compressor made it possible to reduce the volume of the noise-reducing auxiliary devices by 50%.Air bearings that do not require oil were used as the compressor bearings based on the necessity of supplying pure air to the fuel cell system.To address the issue of restriction of the operating range of the compressor as a result of turbocharging, a mixed-flow compressor was used, and two-stage compression was applied. This realized a wide operating range and made it possible to increase air supply pressure 1.7-fold compared to a conventional compressor.The development of a new inverter using resolver-less control made it possible to do away with the rotation angle sensor in the motor, contributing to increased motor speed and increased compactness. The use of a full-mold power module and a press-fit connection method reduced the size of the inverter unit.

References

  1. (1) Kawasaki, S., Ogura, M., Ono, T., Kami, Y.: Development of the Honda FCX Fuel Cell Vehicle, Honda R&D Technical Review, Vol. 15, No. 1, p. 1-6
  2. (2) Kimura, K., Kawasaki, T., Ohmura, T., Atsumi, Y., Shimizu, K.: Development of New Fuel Cell Vehicle CLARITY FUEL CELL, Honda R&D Technical Review, Vol. 28, No. 1, p. 1-8
  3. (3) Japan Society of Mechanical Engineers: JSME Mechanical Engineers’ Handbook, B. Applications, B5 fluid machinery, Japan Society of Mechanical Engineers publication, p. 11, 68, (1986), (in Japanese)
  4. (4) Turbomachinery Society of Japan: Turbomachinery – beginner’s guide, Industrial Publishing Co. Ltd., p. 99, (1989), (in Japanese)
  5. (5) Hoshijima, H.: Sekaihatsuno jidoshayo mirasaikuruenjin to yoretokannogata 4WS ni chumoku, Yunosu 800 no subete, Motor Fan Separate Volume, p. 14-21, (1993), (in Japanese)
  6. (6) Matsunaga, M., Fukushima, T., Ojima, K., Kimura, K., Ogawa, T.: Fuel Cell Powertrain for FCX Clarity, Honda R&D Technical Review, Vol. 21, No. 1, p. 7-15

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.28 No.2 (53 - 59)

PDF

PDF 937KB

Citation Information

Tatsuya SUGAWARA, Takuma KANAZAWA, Yu TACHIBANA, Naoki IMAI.
Development of Air Supply System for CLARITY FUEL CELL
Honda R&D Technical Review Vol.28 No.2 pp.(53 - 59)2016.
Copy citation information
Copied