Abstract
In order to precisely analyze valve behavior of an automobile engine valve train, we applied a laser displacement meter. We were able to demonstrate that laser measurements are more precise and that lasers produce less noise than a conventional electro optical displacement transducer. However, when the laser method is applied, such problems as irregular reflection of noise on walls around the measured object, and digital conversion noise that is inherent to laser measurements, were encountered.We resolved these problems and improved the laser measurement by changing the shape of the measured surface and the surrounding walls to decrease the noise, and through zero point shift of the input voltage.As a result of reducing the noise, it became possible to precisely analyze valve behavior, and we isolated the rocker arm recollision with the valve due to the delay caused by the rocker arm inertia. Additionally, because the laser is more compact than the conventional optical instrument, it is possible to simultaneously measure multiple cylinders.
References
- (1) Y. Akimoto, et al.: “Development of a High-power and Low-emission Engine for the Honda S2000”, Honda R&D Technical Review, Vol.11, No.1, p.32-35 (1999) (Written in Japanese)
- (2) S. Suehiro, et al.: “Dynamic Simulation for Valve Systems of Motorcycle Engines”, Internal Combustion Engine, Vol.28, No.355, p.46-53 (1989) (Written in Japanese)
- (3) H. Sakai, et al.: “Research on the Valve Motion of Internal Combustion Engines”, Journal of the Japan Society of Mechanical Engineers, Vol.35, No.237, p.1084-1092 (1969) (Written in Japanese)
- (4) K. Akiba, et al.: “New Simulation on the Vibration of Valve Mechanisms”, Isuzu Technical Journal, No.67, p.1-4 (1971) (Written in Japanese)
- (5) A. Sato, et al.: “Cam Design for High Speed Internal Combustion Engines”, Toyota Technical Review, Vol.18, No.4, p.333-341 (1967) (Written in Japanese)
- (6) T. Kosugi, T. Seino: “Valve Motion Simulation Method for High Speed Internal Combustion Engines”, SAE Paper 850179
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.12 No.2 (141 - 146)
PDF
PDF 203KB
Citation Information
Hisashi KANDA, Motoki TANAKA.
Establishment of Valve Displacement Measurement by Laser Equipment
Honda R&D Technical Review Vol.12 No.2 pp.(141 - 146)2000.
Copy citation information
Copied