• Home
  • List of Papers
  • Exploratory Study of an Airbag Concept for a Large Touring Motorcycle: Feasibility Verification

Exploratory Study of an Airbag Concept for a Large Touring Motorcycle: Feasibility Verification

Abstract

Based on the injury assessment method established by ISO/CD 13232 and including neck injury assessment, which had not been established previously, the prototype airbag system was evaluated using full scale impact tests in seven configurations and computer simulation of 200 impact configurations, which calculate the process of dummies contacting the ground. The GL1800 was used for this study; previous studies used the predecessor large touring motorcycle (GL1500). Furthermore, in addition to the assessment specified in ISO/CD 13232, tests using other configurations and other rider conditions were conducted. It was judged from the results obtained that an airbag system for a large touring motorcycle, like the GL1800, is feasible.

References

  1. (1) Inoue, T., Miura, K., et al.: A Experimental Collision Test on Motorcycles with Passenger Cars, Paper No. 15 of the Safety Research Tour in the USA from the Viewpoint of Vehicle Dynamics, Society of Automotive Engineers of Japan (1969)
  2. (2) International Standard ISO 13232: 1996, Motorcycles – Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles, Parts 1 to 8, International Standards Organization, Geneva (1996)
  3. (3) Iijima, S., et al.: Exploratory Study of an Airbag Concept for a Large Touring Motorcycle, Sixteenth International Technical Conference on the Enhanced Safety of Vehicles, Paper No. 98-S10-O-14 (1998)
  4. (4) Yamazaki, T., et al.: Exploratory Study of an Airbag Concept for a Large Touring Motorcycle: Further research, Seventeenth International Technical Conference on the Enhanced Safety of Vehicles, Paper No. 01-S9-O-240 (2001)
  5. (5) Namiki, H., et al.: A Computer Simulation for Motorcycle Rider-Motion in Collision, Small Engine Technology Conference & Exhibition, Paper No. 2003-32-0044, 2003
  6. (6) Kuroe, T., et al.: Exploratory Study of an Airbag for a Large Scooter-Type Motorcycle, 5th International Motorcycle Conference (2004)
  7. (7) Traffic Accident Data, 2002, Institute for Traffic Accident Research and Data Analysis, Japan (2004)
  8. (8) Federal Motor Vehicle Safety Standard 208, United States Code of Federal Regulations Part 572-208 (2000)
  9. (9) Eppinger, R., Sun, E., Kuppa, S., Saul, R.: Supplement; Development of Improved Injury Criteria for the Assessment of Advanced Automotive Restraint Systems – II, National Highway Traffic Safety Administration (2000)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.17 No.2 (144 - 152)

PDF

PDF 1MB

Citation Information

Takeshi KUROE, Hideo NAMIKI, Satoshi IIJIMA.
Exploratory Study of an Airbag Concept for a Large Touring Motorcycle: Feasibility Verification
Honda R&D Technical Review Vol.17 No.2 pp.(144 - 152)2005.
Copy citation information
Copied