• Home
  • List of Papers
  • Study of Inspection Technology for Gear Surface using Self-organizing Map

Study of Inspection Technology for Gear Surface using Self-organizing Map

Abstract

Research was carried out on inspection technology for gear surface imperfection inspection that has the same degree of accuracy as that of a human inspector. Regarding the surface of the tooth which is the object of inspection, over-detection resulting from the extraction of uneven brightness other than that due to imperfections was an issue. For this reason, the features of imperfections that permit imperfections to be discriminated from non-imperfections were set based on visual observation. In addition, a self-organizing map which is a kind of neural network was employed as a method whereby these features are used to identify imperfections in the same way as a human inspector. By using this map to teach the inspection system the features of multiple imperfections and also uneven brightness and dirt on the surface of the gear, it was possible to recognize imperfections to the same degree of accuracy as that of a human inspector. Technology constructed using this imperfection recognition method enabled the work of visual inspection to be reduced to about 10% of that necessitated previously.

References

  1. (1) Komori, M., Kubo, A., Takahashi, T., Tanaka, T., Ichihara, Komiyama, M.: Failures of Involve Gears Due to Contact of Side Edge and Creat of Tooth (1st Report, Chipping of Side Edge of Tooth and Progress to Tooth Breakage), Transactions of Japan Society of Mechanical Engineers(C), Vol. 69, No. 685, p. 273-280 (2003)
  2. (2) Kohonen, T.: Self-Organizing Naps, Springer-Verlag (1995)
  3. (3) Kamomoto, N., Wang, B., Omatu, S.: Quality Test of Interphones Using Two kinds of Neural Networks, Transactions of Institute of Electrical Engineers of Japan, Vol. 122-C, No. 10 (2002)
  4. (4) Seki, H., Nakajima, A., Ohtsuka, K., Arai, H.: Observation of Welding Phenomena by Wide Dynamic Range Camera, Journal of the Japan Welding Society, Vol. 70, No. 7, p. 8-11 (2001) (in Japanese)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.17 No.1 (80 - 87)

PDF

PDF 829KB

Citation Information

Junji EGUCHI, Manabu MURAKAMI, Takanao UCHIDA, Kinya FUJIWARA.
Study of Inspection Technology for Gear Surface using Self-organizing Map
Honda R&D Technical Review Vol.17 No.1 pp.(80 - 87)2005.
Copy citation information
Copied