Development of Magnetic Stiffener

Abstract

A magnetic stiffener was developed to enhance workability and increase the degree of freedom in its range of application. A tentative holding function that does not use release paper and does away with the need for a human-powered press-bonding process is needed to enhance workability. This feature was achieved by selecting non-sticky resin materials, and by mixing ferrite particles into and magnetizing the resin layer. In addition, the optimum magnetic force was ascertained in order to help prevent drop-out in the mass production process, and material design was performed to also simultaneously achieve conventional reinforcement performance.

References

  1. (1) JP, 4-80279, A (1992)
  2. (2) JP, 7-68695, A (1995)
  3. (3) Filler Kenkyukai: Kinousei Filler Souran, TECHNONET, p. 45-49 (2000) (in Japanese)
  4. (4) Automobile standard, Seal material for the bodies, JASO, M323-86, JSAE (1986)
  5. (5) General test method for impact resistance of rigid plastics by means of falling weight, JIS K7211
  6. (6) Japanese Society of Automotive Engineers of Japan: Voluntary approach to vehicle cabin VOC reduction, Japan Automobile Manufacturers Association, Inc., News Releases (2005)
  7. (7) Japanese Society of Automotive Engineers of Japan: Syashitsunai VOC (Kihatsuseiyuukikagoubutsu) Teigen ni Taisuru Jisyu Torikumi, JAMA report, No. 98 (2005) (in Japanese)
  8. (8) TDK Corporation: With Ferrite, Nikkan Kogyo Shinbun, p. 154-155 (1986)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.20 No.2 (125 - 131)

PDF

PDF 214KB

Citation Information

Masanobu YAGUCHI.
Development of Magnetic Stiffener
Honda R&D Technical Review Vol.20 No.2 pp.(125 - 131)2008.
Copy citation information
Copied