Development of Chlorine-free Waterborne Primer for Bumper

Abstract

Changes in the production process of the polyolefin substrate used on automotive bumpers have created the need for increased coating adhesion performance. A method of lowering the melting point of polyolefin, the principal component of the primer, in order to fuse the polyolefin resin with the polypropylene (PP) substrate using the heat generated during pre-heating and baking, thus achieving increased adhesion through the interaction force between molecules, was therefore examined. Using a metallocene catalyst, the tacticity of the polyolefin was controlled and its melting point reduced, resulting in the achievement of a higher level of adhesion intensity than the conventional primer. The chlorine that was formerly added to the olefin is no longer used, reducing the burden on the environment.

References

  1. (1) Arakawa, T.: Jidosyayou Purasutikku Zairyou no Hyoumen Syori, Kankyou Taiou Hyoumen Syori Gijyutsu, Tekuno Shisutemu, p. 643-644 (2005) (in Japanese)
  2. (2) Saeki, Y., Ogawa,T.: Development of High Modulus Polypropylene and Paint for Thin Wall Bumper Facia, HONDA R&D Technical Review, Vol. 9, p. 213-219
  3. (3) Shimizu, K.: PP Konpaundo no Doukou, 2006 NenBan Poripuropiren Shijyou no Tettei Bunseki, Yano Keizai Kenkyujyo, p. 68-79 (2006) (in Japanese)
  4. (4) Soga, K.: Metallocens Catalysts for New Generation of Polyolefins, CMC Publishing CO., LTD., 256p. (2001)
  5. (5) Shibuya, E., Suzuki, M., Fujii, S.: Environment. Behavior of Dioxin Emissions from Municipal Solid Waste Incinerators., NKK Technical Report, No. 166, p. 16-20 (1999)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.20 No.2 (60 - 64)

PDF

PDF 170KB

Citation Information

Takanori HASHIMOTO, Takeshi OGAWA.
Development of Chlorine-free Waterborne Primer for Bumper
Honda R&D Technical Review Vol.20 No.2 pp.(60 - 64)2008.
Copy citation information
Copied