Abstract
In order to reduce variations in fastening force in mass production assembly processes, a real-time bolt axial force fastening system was developed to provide fastening force that is stable, whether the work is done by automated equipment or by humans. An ultrasonic wave method is used to measure axial force, with a gap between the bolt head and the probe for increased accuracy. Bolts used for measurement were bolts with specifications that allow for forming by existing manufacturing processes. The probe emits an ultrasonic beam that is propagated by means of a newly developed solid propagation medium and receives echoes separately from the head and bottom of the bolt. Operations on the two received echoes are carried out simultaneously so that measurements are stable even while fastening is underway, realizing real-time axial force measurement. As a result, measurement of axial force during fastening is realized without changing production takt time, bolt manufacturing costs, and other such existing conditions.This technology is capable of bidirectional communication with nutrunners, the electric fastening equipment that has been widely adopted for mass production fastening processes. It can control fastening force to a preset axial force value, and it has successfully reduced axial force variations to one-tenth or less than what is experienced with existing torque methods of tightening.
References
- (1) Teshima, Y., Gotoh, Y., Takahashi, N.: Non-destructive Slack Inspection Technique for High Tension Bolts using the Electromagnetic Phenomenon, Journal of JSNDI, Vol. 61, No. 5, p. 227-234, (2012) (in Japanese)
- (2) Ohashi, N., Hagiwara, M., Yoshimoto, I.: Characteristics of Bolted Joint in Plastic Region Tightening, Journal of the Japan Society of Precision Engineering, Vol. 51, No. 7, p. 1383-1389, (1985) (in Japanese)
- (3) JIS Z 2353: Method for measurement of ultrasonic velocity in solids, (2021)
- (4) http://usmaj.o.oo7.jp/shindoshi.html
- (5) Shigeno, N.: 3.5.2 Tanshokushi No Shurui To Yoto, Hihakai Kensa Gijutsu Shirizu Choonpa Tansho Shiken II, The Japanese Society for Non-Destructive Inspection, p. 36-37, (2000) (in Japanese)
- (6) Makino, T., Sakai, T., Toriyama, H.: Choonpa O Riyo Shita Boruto Jikuryoku Sokutei Sochi No Kaihatsu To Jitsuyoka, Journal of the Japan Society of Precision Engineering, Vol. 43, No. 2, p. 227, (1977) (in Japanese)
- (7) Ito, Y.: Method of Generating High-intensity Aerial Ultrasonic Waves and Its Applied Technologies, IEICE Fundamentals Review, Vol. 9, No. 3, p. 205-213, (2016) (in Japanese)
- (8) Hosaka, Y., Imano, K.: Strobe Photo-elastic Visualization of Ultrasound Propagation in the Residual Stress Field of the Solid, Journal of the Society of Materials Engineering for Resources of Japan, Vol. 27, No. 1/2, p. 20-24, (2016) (in Japanese)
- (9) JP, 2020-020749, A
- (10) JP, 2020-020763, A
- (11) JP, 2021-148629, A
- (12) JIS Z 2350: Method for measurement of performance characteristics of ultrasonic probes, (2002)
- (13) JIS K 6253-3: Rubber, vulcanized or thermoplastic — Determination of hardness — Part 3: Durometer method, (2012)
- (14) JP, 2020-019124, A
- (15) JP, 2021-196268, A
- (16) https://www.nittokog.co.jp/fastenerscatalog/F-TOKUHIN-R.pdf
- (17) Anan, G., Namimura, Y., Hasegawa, T., Oki, Y.: Development of Wire Rods with Improved Cold Headability, R&D KOBE STEEL ENGINEERING REPORTS, Vol. 48, No. 1, p. 39-42, (1998) (in Japanese)
- (18) JIS B 1051: Mechanical properties of fasteners made of carbon steel and alloy steel — Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread, (2014)
- (19) JP, 2020-020453, A
- (20) Nagata, Y., Munechika, M.: Dai 1 Sho, Kotei Noryokushisu No Teigi To Hyokakijun, Kotei Noryokushisu, Jissen Hoho To Sono Riron, Japanese Standards Association, p. 17-24, (2011) (in Japanese)
- (21) JIS B 1081: Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results, (1997)
- (22) Hagiwara, M.: Fatigue Fracture of a Bolt in Bolt/Nut Assembly, Journal of the Japan Society for Precision Engineering, Vol. 81, No. 7, p. 623-627, (2015)
- (23) Yano, K.: Fundamentals of Quality Engineering and Parameter Design, Journal of the Japan Society for Precision Engineering, Vol. 81, No. 11, p. 1008-1012, (2015)
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.34 No.2 (26 - 34)
PDF
PDF 1.1MB
Citation Information
Kazuhiro TSUZAKI, Toshitsugu SAKAKIBARA, Yasushi HARA, Tsukasa ISHIDA.
Real-time Bolt Axial Force Fastening System Using Ultrasonic Waves in Mass Production Assembly Process
Honda R&D Technical Review Vol.34 No.2 pp.(26 - 34)2022.
Copy citation information
Copied