B-pillar Load Transfer Mechanism in Side Collision

Abstract

Based on side collision testing that the Insurance Institute for Highway Safety in the United States has been conducting, a technology was created that can reduce the amount of B-pillar deformation and also generate a high load. In a side collision, it is necessary for the greater part of the load received from the barrier to be supported by the bending of the B-pillar. This was addressed by creating a new load path in the B-pillar. The new load path is able to support the lateral load input from the barrier as an axial load in a downward direction in the vehicle body. This increases the load from the initial time of collision and reduces bending deformation. A load transfer mechanism in the B-pillar cross-section was added for the axial load and this was realized by a load path to the side sill. The structure of the load transfer mechanism was decided through theoretical calculation and simulation. A prototype was fabricated with a load transfer mechanism in a mass-produced B-pillar. Drop tests with the prototype proved that the load generated on the B-pillar was doubled so that the amount of deformation could be reduced to one-fifth.

References

  1. (1) Arbelaez, R. A., Mueller, B. C., Brumbelow, M. L., Teoh, E. R.: Next Steps for the IIHS Side Crashworthiness Evaluation Program, SAE Technical Paper, SC18-22-0002, (2019)
  2. (2) Insurance Institute for Highway Safety: Side Impact Crashworthiness Evaluation 2.0 Crash Test Protocol (Version I), (2020)
  3. (3) Hasegawa, A., Fujii, T., Matsuura, N., Shimizu, T., Miura, Y.: Load Distribution by Rear Bumper Beam in FMVSS 301R Test Protocol, Honda R&D Technical Review, Vol. 32, No.1, p. 51-60
  4. (4) Mizuno, K.: Dai 7 sho Sokumen shototsu, Introduction to Crash Safety of Passenger Vehicles, The University of Nagoya Press, p. 181-185, (2018) (in Japanese)
  5. (5) Inokuchi, J., Yamamae, Y., Yasuki, T.: Investigation of Reduced Model for Displacement Mode of Center Pillar in SUV Side Impact, Transactions of Society of Automotive Engineers of Japan, Vol. 49, No. 2, p. 359-364, (2018) (in Japanese)
  6. (6) Hasegawa, A., Fujii, T., Matsuura, N., Shimizu, T.: Enhancement of Longitudinal Energy Absorption Efficiency in FMVSS 301, SAE Technical Paper, 2020-01-1225, (2020)
  7. (7) Okada, E.: Hottosutanpu to kōrudosutanpu (Tokushu Kagayaki to insatsu), Japan Printer, Vol. 90, No. 7, p. 25-28, (2007) (in Japanese)
  8. (8) Fukuchi, H., Nomura, N.: Automotive Solution: Development of Hot Stamping with High Productivity, Shinnittetsu Sumikin giho, Vol. 402, p. 70-72, (2015) (in Japanese)
  9. (9) Maki, H., Takaki, N.: Application of Next-generation High-lambda-type High-strength Steel Sheets, Transactions of Society of Automotive Engineers of Japan, Vol. 48, No. 6, p. 1347-1352, (2017) (in Japanese)
  10. (10) Pednekar, V., Pereira, A., Ballard, A., Chen, G., Komarivelli, R., Li, H.: Structural Performance Comparison between 980MPa Generation 3 Steel and Press Hardened Steel Applied in the Body-in-White A and B-Pillar Parts, SAE Technical Paper, 2020-01-0537, (2020)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.34 No.1 (92 - 102)

PDF

PDF 1.6MB

Citation Information

Atsushi HASEGAWA, Hitomi YAMADA, Ryotaro TAKEUCHI, Takayuki FUJII, Yumi SAITO.
B-pillar Load Transfer Mechanism in Side Collision
Honda R&D Technical Review Vol.34 No.1 pp.(92 - 102)2022.
Copy citation information
Copied