• Home
  • List of Papers
  • Turbocharged and Naturally Aspirated Gasoline Direct Injection V6 Engines with Common Architecture based on New Valve Train System

Turbocharged and Naturally Aspirated Gasoline Direct Injection V6 Engines with Common Architecture based on New Valve Train System

Abstract

Two gasoline direct injection V6 engines were developed using a new valve train architecture with a common engine geometry: a turbocharged engine aimed at enhancing power performance, and a naturally aspirated engine aimed at enhancing environmental performance. Variable Timing Control for intake and exhaust was adopted to improve boost pressure responsivity for the turbocharged engine and thermal efficiency for the naturally aspirated engine. To maintain an engine size comparable to that of the previous engine, a new compact valve train was developed, combining a valve lifter-based Variable Cylinder Management system with built-in cylinder deactivation switching mechanism, hydraulic lash adjusters, and roller rocker arms. With these changes, these systems were equipped at the same cylinder head size as the previous SOHC engine. Furthermore, the new valve train allowed for a common engine geometry between the turbocharged and naturally aspirated engines, including cylinder head structure and rotational axis positions of the crank shaft and cam shafts, to help ensure commonality for the timing belt drive system and other systems. A single twin-scroll turbocharger was adopted for the turbocharged engine, achieving a maximum power of 265 kW and maximum torque of 480 Nm. The naturally aspirated engine features a fuel injection system with fuel pressure increased to 30 MPa, and a vehicle with the engine achieved an LEV III SULEV30 rating, producing PM of 1 mg/mile.

References

  1. (1) Noguchi, K., Fujiwara, M., Segawa, M., Sawamura, K., Suzuki, S.: Development of V6 i-VTEC Engine with Variable Cylinder Management, Honda R&D Technical Review, Vol. 16, No. 1, p. 85-92
  2. (2) Segawa, M., Kumagai, K., Sato, R., Tamura, Y., Fujiwara, M.: Development of V6 Engine with New Variable Cylinder Management, Honda R&D Technical Review, Vol. 20,No. 1, p. 35-42
  3. (3) Suzuki, N., Hayashi, Y., Ishiki, K., Sato, A., Esaki, T., Watanabe, S.: Development of New V6 3.5 L Gasoline Engine, Honda R&D Technical Review, Vol. 25,No. 2, p. 9-16
  4. (4) Jono, M., Taguchi, M., Shonohara, T., Narihiro, S.: Development of a New 2.0L I4 Turbocharged Gasoline Direct Injection Engine, SAE Technical Paper 2016-01-1017, (2016)
  5. (5) United States Environmental Protection Agency: The 2021 EPA Automotive Trends Report: Greenhouse Gas Emissions, Fuel Economy, and Technology since 1975, Executive Summary, EPA-420-S-21-002, (2021)
  6. (6) Tsukui, T., Tsutsumizaki, T., Nishizawa, K., Kumagai, Y., Nakajima, M.: Development of Variable Valve Control System for Directly Actuated Type, HONDA R&D Technical Review, Vol. 11, No. 1, p. 79-84

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.35 (17 - 24)

PDF

PDF 1.7MB

Citation Information

Shotaro TAKI, Satoshi KAWAWA, Kazumasa ISHII, Akio IMAKITA, Yukio KONISHI, Yuki TOMITANI.
Turbocharged and Naturally Aspirated Gasoline Direct Injection V6 Engines with Common Architecture based on New Valve Train System
Honda R&D Technical Review Vol.35 pp.(17 - 24)2023.
Copy citation information
Copied