Abstract
A bipolar plate for a new structure fuel cell stack was developed jointly with General Motors Company. In order to achieve both lower cost and higher productivity while enhancing the functionality of the bipolar plate in this study, a bipolar plate structure that assumes high-cycle molding was developed. A coating consisting of carbon and titanium is applied to the stainless steel base material before stamping. The seal structure was changed from a multilayer rubber seal structure to a metal bead seal structure formed by stamping after coating and a welded seal structure. In addition, a structure without a rubber coating was adopted for high-cycle molding.
References
- (1) https://global.honda/jp/stories/057.html, (accessed 2024/6/12)
- (2) Matsunaga, M., Fukushima, T., Ojima, K., Kimura, K., Ogawa, T.: Fuel Cell Powertrain for FCX Clarity, Honda R&D Technical Review, Vol. 21, No. 1, p. 7-15
- (3) Ishikawa, C., Iwaida, M., Naito, H., Inai, S., Yoshida, H., Muromoto, N.: High-durability and Cost-effective Fuel Cell Stack with New Structure, Honda R&D Technical Review Website, (2024)
- (4) Kikuchi, H., Kaji, H., Nishiyama, T., Okonogi, D., Harata, H.: Development of New FC Stack for CLARITY FUEL CELL, Honda R&D Technical Review, Vol. 28, No. 2, p. 45-52
- (5) Nakazawa, T., Suzuki, S., Tanaka, Y., Komatsu, H.: Effect of High Temperature Dynamic Strain on Grain Boundary Sensitization in Type 304 Stainless Steels, The journal of the Japan Institute of Metals and Materials, Vol. 62, No. 9, p. 812-819, (1998) (in Japanese), doi: 10.2320/jinstmet1952.62.9_812
- (6) Zatoń, M., Rozière, J., Jones, D. J.: Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review, Sustainable Energy & Fuels, Royal Society of Chemistry, Vol. 1, Issue 3, p. 409-438, (2017), doi: 10.1039/C7SE00038C
- (7) JIS C 60664-1: 2009, Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.37 (34 - 40)
PDF
PDF 1.6MB
Citation Information
Kazuo NUNOKAWA, Hiroshi SHINKAI, Satoshi OYAMA, Kentaro ISHIDA, Shuhei GOTO.
Development of High-durability and Low-cost Fuel Cell Bipolar Plate
Honda R&D Technical Review Vol.37 pp.(34 - 40)2025.
Copy citation information
Copied