Development of Light Weight Connecting Rod

Abstract

The conventional middle carbon non-heat-treated steel used in connecting rods has been used as a base in the development of a new material. High fatigue strength has been achieved by increasing the toughness of the ferrite, which tends to act as a crack origin, while optimal control of the reduction of toughness achieved through addition of Ti has been effective in enabling fracture splitting of the material.Connecting rods produced using the new steel demonstrate 30% higher fatigue strength than connecting rods produced from conventional non-heat treated steel, and possess stable fracture splitting characteristics. In addition, the new connecting rods show identical strength to connecting rods made of the conventional material, but are 13% lighter.

References

  1. (1) Matsubara, T., Sato, Y., Kimura, K., Kawase, N., Ito, S.: Development of Free Machining Titanium Alloy for Connecting Rods, HONDA R&D Technical Review, Vol. 3, p. 12-26
  2. (2) Matsubara, T., Sato, Y., Iida, Z., Taguchi, T.: Development of a High Strength Free Machining Microalloyed Steel for Connecting Rods, HONDA R&D Technical Review, Vol. 4, p. 73-85
  3. (3) Sato, T., Kurita, M.: Saikin no Hichousitsukou ni tuite, Tanzou Gihou, Vol. 83, p. 16-25 (2000) (in Japanese)
  4. (4) Watari, K.: The effect of precipitates on toughness of microalloyed steel, CAMP-ISIJ, Vol. 11, p. 551 (1998)
  5. (5) Watari, K.: Hichousitsukou no Jinsei ni Oyobosu Sekisyutsubutsukeitai no Eikyou, The Iron and steel Institute of Japan Kouen Taikai, p. 83-84
  6. (6) Nishioka, K., Hirakawa, K., Toyama, K.: Material Selection and Failure Analysis against Fatigue Failures of Steel Components, SUMITOMO METALS, Vol. 32, p. 68-88 (1980)
  7. (7) Kakizaki, T., Kamada, Y., Nishida, K., Kurita, M.: Effect of alloying on fatigue strength in high-strength microalloyed steel, CAMP-ISIJ, Vol. 7, p. 774 (1994)
  8. (8) Watari, K., Aihara, K.: Mechanical Properties of non Vanadium-Titanium added Microalloyed Steels, CAMP-ISIJ, Vol. 9, p. 506 (1996)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.17 No.2 (115 - 121)

PDF

PDF 399KB

Citation Information

Zenji IIDA, Kentaro TAKADA, Shigeru SUZUKI, Chikashi SATO.
Development of Light Weight Connecting Rod
Honda R&D Technical Review Vol.17 No.2 pp.(115 - 121)2005.
Copy citation information
Copied