Abstract
A center injection system in which a high-pressure fuel injector is located in the center of the combustion chamber has been employed in a direct-injection engine, significantly improving fuel economy and emissions performance in the direct injection stratified charge (DISC) range. Ensuring the stable formation of a combustible mixture around the spark plug at the appropriate time is the most important element in achieving stable combustion in the DISC range. During the development of the engine, a variety of methods were used to measure mixture distribution, including visualization using Laser Induced Fluorescence (LIF) and infrared absorption analysis to measure the air-fuel ratio around the spark plug, and CFD simulations were conducted to analyze mixture distribution and in-cylinder flow, enabling analysis and evaluation of the combustion process. These analyses enabled the design of an original piston cavity form with reference to the fuel spray characteristics of the center-positioned high-pressure injector. This has ensured the stable formation and maintenance of a compact combustible mixture around the spark plug, enabling the achievement of a high lean combustion limit in stratified combustion and significantly reducing fuel consumption.
References
- (1) Koike, M., Saito, A., Sawada, D., Ishikawa, Y.: A New Concept Direct Injection SI Gasoline Engine, JSAE Annual Congress Proceedings, No. 69-99, JSAE9939596
- (2) Kanda, M., Shimizu, R., Kobayashi, T., Matsushita, S., Koike, M., Saito, A.: New Concept of a Direct Injection SI Gasoline Engine, JSAE Annual Congress Proceedings, No. 69-99, JSAE9939604
- (3) Abe, S., Sasaki, K., Baika, T., Nakashima, T., Fujishiro, O.: Combustion Analysis of a New L4 Direct Injection SI Gasoline Engine, JSAE Annual Congress Proceedings, No. 78-00, JSAE20005524
- (4) Goto, H., Hirose, K., Saitoh, M., Matsumoto, S., Iitaka, S., Takashiba, K.: Development of High-pressure Fuel System for Direct Injection Gasoline Engine, Honda R&D Technical Review, Vol. 16, No. 1, p. 47-54
- (5) Kohda, Y., Suganami, T., Kobayashi, H., Ogawa, K.: Development of High-performance and Low-emission Direct Injection Gasoline Engine, Honda R&D Technical Review, Vol. 16, No. 1, p. 39-46
- (6) Kohda, Y., Goto, H., Kobayashi, H., Horie, K.: Development of Low-fuel economy and Low-emission Direct Injection Gasoline Engine, JSAE Annual Congress Proceedings, No. 19-04, JSAE20045178
- (7) Nishiyama, A., Kawahara, N., Tomita, E., Fujiwara, M., Ishikawa, N., Kamei, K., Nagashima, K.: In-Situ Fuel Concentration Measurement near Spark Plug by 3.392 µm Infrared Absorption Method-Application to a Port Injected Lean-Burn Engine, SAE Paper 2004-01-1353
- (8) Yamaguchi, K., Kakuho, A., Fukuda, T., Urushihara, T., Itoh, T.: A Study of Air-Fuel Mixture Formation in Direct Injection SI Engine, JSAE Annual Congress Proceedings, No. 77-01, JSAE20005524
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.16 No.2 (71 - 78)
PDF
PDF 1.2MB
Citation Information
Shinya ABE, Naohiro ISHIKAWA, Naoaki TAKEDA, Shigeru AKIMOTO.
Optimization of Combustion Chamber for 2.0L Direct-Injection Gasoline Engine
Honda R&D Technical Review Vol.16 No.2 pp.(71 - 78)2004.
Copy citation information
Copied