A center injection system in which a high-pressure fuel injector is located in the center of the combustion chamber has been employed in a newly developed direct injection gasoline engine. The high-pressure fuel injector is highly responsive, with a minimum injection timing of 0.7 msec, and injects an ultra-atomization spray with an average droplet diameter of less than 12 μm. To ensure durability and reliability in this original center injection system, the high-pressure fuel injector mounting employs a layout in which the unit is secured by arms. The design of the high-pressure fuel supply lines was optimized using simulations, and the reduction of stress and the adoption of a structure to damp fuel pulsation have resulted in the achievement of high reliability. A simple plunger and spill solenoid system has been employed in the high-pressure fuel pump, enabling the required driving force to be reduced, the component to be reduced in size, and the achievement of high-accuracy fuel pressure control.
Article of Honda R&D Technical Review Vol.16 No.1 (47 - 54)