Abstract
This paper reports the results of research on increasing the fatigue strength of powder-forged connecting rod materials.The fatigue strength of powder-forged materials was increased without adding special alloy elements or lowering workability by adjusting the ratios of the conventional main mixed powders (iron, carbon, copper) and by controlling the sintering temperature conditions. In addition to solid solution strengthening of the ferrite using copper, reducing porosity, which is a material internal defect, is also an effective method of increasing fatigue strength. Reducing carbon content greatly reduced the occurrence of defects in the forging stage.The results of this research showed that the fatigue strength of high strength powder-forged materials can be increased by 30% or more over that of conventional materials, resulting in powder-forged connecting rods to be applied to even higher output and higher load engines than before.
References
- (1) Matsubara, T., Sato, Y., Kimura, K., Kawase, N., Ito, S.: Development of Free Machining Titanium Alloy for Connecting Rods, HONDA R&D Technical Review, Vol. 3, p. 12-26
- (2) Matsubara, T., Sato, Y., Iida, Z., Taguchi, T.: Development of a High Fatigue Strength Free Machining Microalloyed Steel for Connecting Rods, HONDA R&D Technical Review, Vol. 4, p. 73-85
- (3) Iida, Z., Takada, K., Suzuki, S., Sato, C.: Development of Lightweight Connecting Rod, Honda R&D Technical Review, Vol. 17, No. 2, p. 115-121
- (4) Fukuda, S., Etou, H.: Development of Fracture Splitting Connecting Rod, JSAE Review, Vol. 23, No. 1, p. 101-104 (2002)
- (5) Yamaguchi, M., Ookuma, S., Miyazawa, T., Yamada, Y.: Development of Fracture-Splitting Connecting Rod, NISSAN Technical Review, No. 56, p. 21-25 (2005)
- (6) Ilia, E., O’Neill, M., Tutton, K., Lanni, G., Letourneau, S., Haehnel, M.: Benchmarking the Industry: Powder Forging Makes a Better Connecting Rod, SAE paper, No. 2005-01-0713, p. 1-13 (2005)
- (7) Ilia, E., O’Neill, M., Tutton, K.: Higher Fatigue Strength Materials for Powder Metal Forged Connecting Rods, SAE paper, No. 2002-010611, p. 1-7 (2002)
- (8) James, B. W., McDermott, M. J., Powell, R. A.: “Powder Forging” Metals Handbook, ASM International, Vol. 14, No. 9 (1988)
- (9) Nihon Gakujyutsu Shinkoukai Seikou Dai19iinkai: Tekkou to Goukingenso (Jyou), Seibundo Shinkousya, p. 353-355(1966) (in Japanese)
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.19 No.2 (136 - 144)
PDF
PDF 577KB
Citation Information
Kentaro TAKADA, Ryosuke KOGURE, Teruo KOBAYASHI.
Research of High Fatigue Strength for Powder-forged Connecting Rods
Honda R&D Technical Review Vol.19 No.2 pp.(136 - 144)2007.
Copy citation information
Copied