• Home
  • List of Papers
  • Establishment of Method for Optimizing Multi Specifications for Sound-proof Packages

Establishment of Method for Optimizing Multi Specifications for Sound-proof Packages

Abstract

This paper describes an optimization method for designing a vehicle sound-proof package. This method enables the achievement of an optimum balance between lower weight and higher absorption performance. In order to propose a sound-proof package in the early stages of vehicle development, it is necessary to assess the number of sound-proof elements required and to select the optimum design specifications for weight and absorption performance. However, it is difficult to achieve conflicting objectives simultaneously, and acoustic engineers therefore require special technical knowledge. The research discussed here developed a new automated optimization method that resolves these issues. The new method enables detailed sound-proof package specifications to be obtained, including the thickness distribution for each part. These specifications can be easily transferred to drawings. The method was successfully used to reduce the sound pressure level of a vehicle cabin, providing verification of its accuracy.

References

  1. (1) Noguchi, Y., Doi, T., Tada, H., Misaji, K.: Selection Technique of Sound Absorption Type Acoustic Insulation Material by Applying SEA Modeling Method, Honda R&D Technical Review, Vol. 18, No. 1, p. 149-153
  2. (2) Noguchi, Y., Doi, T., Tada, H., Misaji, K.: Development of the next popularly-priced car lightweight sound isolation package, JSAE Paper, 20055746, No. 123-05 (2005)
  3. (3) Misaji, K., Tada, H., Yamashita, T., Mantovani, M., Gaudino, C., Falk, T.: Prediction of the SEA Input Parameters for the Sound Package, SAE Paper, 2003-01-1022
  4. (4) Schittkowski, K.: A fortran subroutine for solving constrained nonlinear programming problems, Annals of Operations Research, Vol. 5, p. 485-500 (1985/86)
  5. (5) Deb, K., Agrawal, S., Pratap, A., Meyarivan, T.: A fast and elitist multi-objective genetic algorithm: NSGA-II, Technical Report 200001, Indian Institute of Technology Kanpur, Kanpur Genetic Algorithm Laboratory (2000)
  6. (6) Deb, K.: Multi-Objective Optimization using Evolutionary Algorithms, John Wiley & Sons (2001)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.19 No.1 (140 - 147)

PDF

PDF 332KB

Citation Information

Hiroko TADA, Fumihiko IDE, Tadashi SASAKI, Jun HSU.
Establishment of Method for Optimizing Multi Specifications for Sound-proof Packages
Honda R&D Technical Review Vol.19 No.1 pp.(140 - 147)2007.
Copy citation information
Copied