• Home
  • List of Papers
  • Hydraulic Control Technologies with Robust Stability and Performance for CVT Start Clutch

Hydraulic Control Technologies with Robust Stability and Performance for CVT Start Clutch

Abstract

Honda Multi Matic S is a lightweight compact CVT with a hydraulically controlled wet multiple plate clutch (start clutch) used for starting. The start clutch is controlled with the torque converter as a reference, but the actual pressure is not sensed. This results in an issue in which the start characteristics are affected by temperature changes, age deterioration of the hydraulic circuit, and changes in hydraulic pressure characteristics due to process dispersion of components. Accordingly, in this research, a hydraulic servo system was configured in order to realize robust start clutch control with respect to temperature changes in particular. The controllers were composed of a two degree of freedom control system. In the design of the feedback controller, μ-synthesis was used, and variations in characteristics were actively taken into consideration.As a result, the performance was enhanced, particularly at low temperatures, and a roughly equivalent rise time and overshoot rate were achieved at both ambient and low temperatures.

References

  1. (1) Sumi, M., Kunii, H., Fujimoto, S., Ichijo, S., Hasegawa, T., Fukushima, Y.: Development of a New Concept CVT for the Fit, Honda R&D Technical Review, Vol. 14, No.1, p. 67-76
  2. (2) Adachi, K., Wakahara, T., Ochi, T., Kanai, K.: Design of a Gear Ratio Servo Control System for Continuously Variable Transmissions by Two-Degree-of-Freedom Control, Trans. of the Society of Instrument and Control Engineers, Vol. 36, No. 6, p. 527-533 (2000)
  3. (3) Okamura, Y., Takahashi, M., Hoshino, I.: Velocity Control with Two Degrees of Freedom for Extrusion Press, Trans. of the Society of Instrument and Control Engineers, Vol. 35, No. 7, p. 926-933 (1999)
  4. (4) Sugie, T., Fujita, M.: Feedback Seigyo Nyumon, Corona Publishing Co., Ltd., p. 169-175 (1999) (in Japanese)
  5. (5) Fujita, M.: m-Kaiseki Synthesis no Kiso to Oyou, The Society of Instrument and Control Engineers, 48p. (2001) (in Japanese)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.19 No.1 (82 - 88)

PDF

PDF 259KB

Citation Information

Masayuki OKAMOTO, Satoshi TERAYAMA, Shigeru MORIMOTO.
Hydraulic Control Technologies with Robust Stability and Performance for CVT Start Clutch
Honda R&D Technical Review Vol.19 No.1 pp.(82 - 88)2007.
Copy citation information
Copied