An internal EGR system was devised that opens and closes an exhaust valve slightly at the beginning of the compression stroke, or between the end of the intake stroke and the beginning of the compression stroke. When this valve timing is used, the fresh air-fuel mixture charging rate shows practically no decrease because the action occurs when the intake stroke is more or less over. Sufficient burnt gas for NOx reduction rapidly flows into the cylinder because the in-cylinder pressure is negative. The thermal energy and turbulence kinetic energy of the burnt gas activate the air-fuel mixture in the cylinder. Therefore, this system does not require variable valve timing, and it was designed to use a solenoid to operate an EGR cam that is located on the same shaft as the exhaust camshaft. As a result, the system achieved favorable drivability while reducing NOx by approximately 50% and reducing CO by approximately 20% in the Euro 3 driving mode. Significant reduction of NOx also enabled a reduction of approximately 70% in the catalyst volume needed to satisfy Euro 3 exhaust emissions standards.
Article of Honda R&D Technical Review Vol.22 No.1 (146 - 153)