• Home
  • List of Papers
  • Development of Surface Treatment Composed of Chemical Conversion Treatment and Paint Coating for Black Bolts Used in Motorcycles

Development of Surface Treatment Composed of Chemical Conversion Treatment and Paint Coating for Black Bolts Used in Motorcycles

Abstract

This research relates to the development of black surface treatment bolts used for motorcycles. Conventionally, the surface treatments applied for black colored bolts have been, in many cases, the methods using hexavalent chromium. However, hexavalent chromium is designated as a hazardous substance, and its use is restricted. For this reason, the developments of technologies to replace the surface treatment using hexavalent chromium are under way. In the case of using such substitute technologies, the technology for realizing black-colored appearance did not fulfill the requirements, because of the obstacles to realize required appearance and fastening performances. As a result, those bolts were used only for limited applications. In order to cope with this situation, we developed black surface treatment for bolts which can be widely used for motorcycle applications. For the coating composition, a black trivalent chromium conversion coating film and a dip coating layer were formed on a zinc plating coating. The conditions that satisfy the requirements for individual films were also designed.Moreover, the manufacturing conditions were examined and set as well. As a result, we established a surface treatment method that can satisfy the performance requirements as a black bolt for wider application to motorcycles.

References

  1. (1) Osaka Research Institute of Industrial Science and Technology: Aen oyobi Aenkeigokin Mekki no Bousyoku Seinou, Technical Sheet, No. 99040, (1999) (in Japanese)
  2. (2) International Agency for Research on Cancer (IARC): IARC monographs on the evaluation of the carcinogenic risk of chemicals to humans, CHROMIUM, NICKEL AND WELDING, Chromium and chromium compounds, Volume.49, p.49-256, (1990)
  3. (3) Community legislation in force: (Directive 2000/53/EC of the European Parliament and of Council of 18 September 2000 on end-of-life vehicles), Official Journal L269, p.34, (2000)
  4. (4) Commission decision of 27 June 2002, amending Annex II of Directive 2000/53/EC of the European Parliament and of Council on end-of-life vehicles. Official Journal of the European Communities, L170, p.81-84, (2002)
  5. (5) Takikawa, K., Miyadera, T., Ohtsuka, T., Shirakawa, A., Takashima, M., Matsuoka, Y.: Development of Hexavalent Chromium-free Surface Treatment, Honda R&D Technical Review, Vol.17, No.1, p.117-123
  6. (6) Hanada, Y., Higo, S., Ohkubo, H., Okumura, T., Nabeoka, K.: Research and Development of Technology for Use of Trivalent Chromating as Substitution Aimed at Abolition of Hexavalent Chromium, KOMATSU TECHNICAL REPORT, Vol.55, No.162, p.2-14, (2009)
  7. (7) Kashiwada, S.: “COSMER NC” A new non-chromium Rust Preventive for Zinc or Zinc Alloy Galvanized Steel. Research on coatings (Kansai Paint Co., Ltd), No.139, p.40-44, (2002) (in Japanese)
  8. (8) Enomoto, H.: Technology of Black and Blackish finish, Journal of The Surface Finishing Society of Japan, Vol.49, No.11, p.1140-1146, (1998) (in Japanese)
  9. (9) Yamamoto, H.: Theory and Application of Black Chromium Plating, Journal of The Surface Finishing Society of Japan, Vol.49, No.11, p.1147-1152, (1998) (in Japanese)
  10. (10) Takasaki, H.: The dry method of chromate conversion film and the corrosion resistance, Jitsumu Hyomen Gijutsu, Vol.24, No.10, p.489-496, (1977) (in Japanese)
  11. (11) Hasegawa, T.: The trivalent Chromate for Zinc Electroplating, Journal of The Surface Finishing Society of Japan, Vol.53, No.6, p.376-379, (2002) (in Japanese)
  12. (12) Yoshimoto, I.: Neji no Teiketsutai Sekkei no Pointo, Gijutu Saakuru, Japanes Standards Assosiation. p.49-53, (1992) (in Japanese)
  13. (13) Yoshimoto, I.: Neji no Teiketsutai Sekkei no Pointo, Gijutu Saakuru, Japanes Standards Assosiation. p.166-168, (1992) (in Japanese)
  14. (14) Inoue, M.: Technology of hexavalent chromium free black conversion coating, MATEREAL STAGE, Vol.4, No.11, p.72-76, (2005) (in Japanese)
  15. (15) Mizumachi, H., Tobayama, M.: Hyoumen Syori Gijutu Handobukku, NTS Co., Ltd. p.71-76, (2000) (in Japanese)
  16. (16) Kamakari, T., Iwamura, I., Imura, K.: Painting Environment for Improving “Direct Run Rate” at Coating Line, Research on Coatings (Kansai Paint Co., Ltd), No.154, p.38-41, (2012) (in Japanese)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.29 No.2 (90 - 106)

PDF

PDF 1.4MB

Citation Information

Hiroyuki YOSHIDA, Hiroshi HIRAYAMA, Manabu INOUE, Yasuhiro KATO, Takeharu KATO, Kouji TAKAHASHI.
Development of Surface Treatment Composed of Chemical Conversion Treatment and Paint Coating for Black Bolts Used in Motorcycles
Honda R&D Technical Review Vol.29 No.2 pp.(90 - 106)2017.
Copy citation information
Copied