Abstract
Skutterudite-type thermoelectric materials were researched with the goals of enhancing the performance of a lightweight and compact thermoelectric waste heat recovery system and scaling-up to mass production. Measures such as reducing the starting material cost and purity and increasing the manufacturing process yield were promoted, and prospects were achieved for mass production scale manufacturing of high performance thermoelectric materials (P-type thermoelectric properties ZT > 0.8, N-type thermoelectric properties ZT > 1) at approximately 1/100 the current proto-type manufacturing cost. Material nano-structuring was performed to enhance the properties, and the results showed that rare-earth metals added to skutterudite-type thermoelectric materials oxidize easily, and that the carrier concentration in the materials changes due to this oxidation, which has an acute effect on the thermoelectric characteristics. The effects of material nano-structuring in an environment that suppresses oxidation and adjustment of the carrier concentration enhanced the thermoelectric properties by 23.8%.
References
- (1) Rowe, D. M.: Thermoelectrics and Its Energy Harvesting –Modules, Systems, and Applications in Thermoelectrics–, CRC Press, p. 25-5, (2012)
- (2) Ibaraki, S., Endo, T., Kojima, Y., Takahashi, K., Baba, T., Kawajiri, S.: Study of Efficient On-board Waste Heat Recovery System Using Rankine Cycle, JSAE, Vol. 38, No. 4, p. 73-78, (2007)
- (3) Yaguchi, H., Sawada, D., Kamiyama, E., Katayama, M.: Research of a Heat Recovery Stirling Engine for Vehicle Exhaust Gas Energy, JSAE, Vol. 42, No. 2, p. 465-470, (2011)
- (4) Matsumoto, M., Mori, M., Haraguchi, T., Ohtani, M., Kubo, T., Matsumoto, K., Matsuda, H.: Development of State of the Art Compact and Lightweight Thermoelectric Generator Using Vacuum Space Structure, SAE Int. J. Engines, 8(4):1815-1825, (2015)
- (5) Hussain, Q., Brigham, D., Maranville, C.: Thermoelectric Exhaust Heat Recovery for Hybrid Vehicles, SAE Int. J. Engines 2(1), p. 1132-1142, (2009)
- (6) Lee, J., Ohn, H., Choi, J., Kim, S., Min, B.: Development of Effective Exhaust Gas Heat Recovery System for a Hybrid Electric Vehicle, SAE Technical Paper, 2011-01-1171, (2011)
- (7) Kumar, S., Heister, S. D., Xu, X., Salvador, J. R., Meisner, G. P.: Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part I: Numerical Modeling and Baseline Model Analysis, Journal of Electronic Materials, Vol. 42, Issue 4, p. 665-674, (2013)
- (8) Kumar, S., Heister, S. D., Xu, X., Salvador, J. R., Meisner, G. P.: Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation and Topological Studies, Journal of Electronic Materials, Vol. 42, Issue 6, p. 944-955, (2013)
- (9) Liebl, J., Neugebauer, S., Eder, A., Linde, M., Mazar, B., Stütz, W.: The thermoelectric generator from BMW is making use of waste heat, MTZ worldwide, Vol. 70, Issue 4, p. 4-11, (2009)
- (10) Legros, A., Guillaume, L., Diny, M., Zaïdi, H., Lemort, V.: Comparison and Impact of Waste Heat Recovery Technologies on Passenger Car Fuel Consumption in a Normalized Driving Cycle, Energies, 7(8), p. 5273-5290, (2014)
- (11) Poudel, B., Hao, Q., Ma, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., Chen, X., Liu, J., Dresselhaus M. S., Chen, G., Ren, Z.: High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys, Science, Vol. 320, Issue 5876, p. 634-638, (2008)
- (12) Snyder, G. J., Toverer, E. S.: Complex Thermoelectric Materials, Nature Materials, 7, p. 105-114, (2008)
- (13) Liu, W., Yan, X., Chen, G., Ren, Z.: Recent advances in thermoelectric nanocomposites, Nano Energy, 1, p. 42-56, (2012)
- (14) Rogl, G., Grytsiv, A., Rogl, P., Peranio, N., Bauer, E., Zehetbauer, M., Eibl, O.: n-Type skutterudites (R, Ba, Yb)yCo4Sb12 (R = Sr, La, Mm, DD, SrMm, SrDD) approaching ZT approximate to 2.0, Acta materialia, 63, p. 30-43, (2014)
- (15) Rowe, D. M. ed.: Thermoelectrics -Handbook Micro to Nano-, CRC Press book, p. 1-7, (2005)
Author (organization or company)
Publication Information
Article of Honda R&D Technical Review Vol.29 No.1 (212 - 219)
PDF
PDF 1.1MB
Citation Information
Tomohide HARAGUCHI, Kenta KAWANO, Takahiro OCHI, Junqing GUO.
Research on Skutterudite-type Thermoelectric Materials for On-board Waste Heat Recovery System
Honda R&D Technical Review Vol.29 No.1 pp.(212 - 219)2017.
Copy citation information
Copied