• Home
  • List of Papers
  • Method of Magnetizing Rotor with Wide Air Gap Using Magnetic Circuit that Concentrates Magnetic Flux

Method of Magnetizing Rotor with Wide Air Gap Using Magnetic Circuit that Concentrates Magnetic Flux

Abstract

A post-assembly magnetization method was developed to increase magnetic field strength by concentrating magnetic flux in the pulse-type magnetization of small-diameter multipole high-speed rotors with wide air gaps. By concentrating the magnetic flux generated by two sets of magnetizing coils located on the outer periphery of the rotor, a Y-shaped magnetic circuit that passes through one set of magnetizing coils can be created that applies a high magnetic field locally. Magnetizing coils were placed at locations ±135° from the one set of magnetizing coils through which the concentrated magnetic flux passes. This magnetizing coil arrangement can form a large magnetic circuit that passes around the inner periphery of the rotor. The magnetic flux that is not concentrated by this magnetic circuit flows in the direction opposite to the magnetization of the magnet. Therefore, the similar placement of auxiliary coils at the ±67.5° locations suppressed the magnetic flux that leaked from the magnetic circuit. This technology created a high magnetic field in a rotor with a wide air gap and realized the target magnetization ratio of 99.0% or higher in single magnets.

References

  1. (1) Ito, M., Suto, T., Takahashi, A., Hara, T., Iwano, R.: Development of a High Power Density In-Wheel Motor using Halbach Array Magnets, 2022 JSAE Annual Congress Proceedings (Spring), No. 74-22, Publication code 20225324, p. 1-3, (2022) (in Japanese)
  2. (2) Mizuta, T., Ito, K., Hazeyama, M., Kume, M., Takashima, Y.: Rotating Machine Design Technology for High Speed and High Output Electric Motor, MITSUBISHI DENKI GIHO, Vol. 93, No. 6, p. 11-14, (2019) (in Japanese)
  3. (3) https://ims-jp.com/column/02/
  4. (4) JP, 2018-182118, A
  5. (5) JP, 2020-092484, A
  6. (6) Miyata, K., Aoyama, Y., Yokoyama, T., Ohashi, K., Kondo, M., Matsuoka, K.: 3-D Magnetic Field Analysis of Permanent Magnet Motor Considering Magnetizing, Demagnetizing and Eddy Current Loss, IEEJ Transactions on Industry Applications, Vol. 123, No. 4, p. 401-408, (2003) (in Japanese)
  7. (7) Komura, H., Kitaoka, M., Kiyomiya, T., Matsuo, Y.: Development of the New Magnetizing System for Nd-Fe-B Bonded Magnets to use for Microminiature Motors, Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 57, No. 1, p. 19-26, (2010) (in Japanese)
  8. (8) Miura, N.: Measurement Techniques in Magnetic Fields, Journal of The Society of Instrument and Control Engineers, Vol. 26, No. 6, p. 520-527, (1987) (in Japanese)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.36 (19 - 26)

PDF

PDF 2.2MB

Citation Information

Toshitaka KATO, Shinji NEMOTO, Tokio TAIRA.
Method of Magnetizing Rotor with Wide Air Gap Using Magnetic Circuit that Concentrates Magnetic Flux
Honda R&D Technical Review Vol.36 pp.(19 - 26)2024.
Copy citation information
Copied