• Home
  • List of Papers
  • Construction of One-dimensional Humidifier Model in Fuel Cell System

Construction of One-dimensional Humidifier Model in Fuel Cell System

Abstract

The phenomena inside a porous hollow fiber membrane humidifier were analyzed and a one-dimensional humidifier model that can estimate the water transfer rate was constructed to enable control of the water content in the fuel cell stack of a fuel cell system to the appropriate range. The calculation accuracy of the humidifier model was enhanced by investigating and considering the impact of the dry-up phenomenon that may lower the water transfer rate due to partial drying of the porous membrane. In addition, verification was performed by comparing the calculation results of the humidifier model with the results of humidifier evaluation tests and measurements of the water transfer rate in bench operation of the fuel cell system. The estimation accuracy of the humidifier model was confirmed to satisfy the target accuracy of ±15% or less that is needed for use in performance design and control optimization of fuel cell systems.

References

  1. (1) Zatoń, M., Rozière, J., Jones, D. J.: Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review, Sustainable Energy & Fuels, Royal Society of Chemistry, Vol. 1, Issue 3, p. 409-438, (2017), doi: 10.1039/C7SE00038C
  2. (2) Perry, M. L., Daring, R. M., Kandoi, S., Patterson, T. W., Reiser, C.: Operating Requirements for Durable Polymer-Electrolyte Fuel Cell Stacks, Polymer Electrolyte Fuel Cell Durability, Springer, p. 399-417, (2009), doi: 10.1007/978-0-387-85536-3_20
  3. (3) Jinnouchi, R.; Nenryo Denchi no Genri to Ouyou, Asakura Publishing Co., Ltd., p. 132-136, (2023) (in Japanese)
  4. (4) Vu, H. N., Nguyen, X. L., Han, J., Yu, S.: A study on vapor transport characteristics in hollow-fiber membrane humidifier with empirical mass transfer coefficient, International Journal of Heat and Mass Transfer, Vol. 177, p. 1-12, (2021), doi: 10.1016/j.ijheatmasstransfer.2021.121549
  5. (5) Nguyen, X. L., Vu, H. N., Yu, S.: Parametric understanding of vapor transport of hollow fiber membranes for design of a membrane humidifier, Renewable Energy, Vol. 177, p. 1293-1307, (2021), doi: 10.1016/j.renene.2021.06.003
  6. (6) https://www.nok.co.jp/product/film/kashitu.html, (accessed 2024/7/16)
  7. (7) Asaeda, M.: Nano-Pore Technology in Ceramics. Separation Mechanisms of Molecular Mixtures by Porous Ceramic Membranes., Ceramics Japan: bulletin of the Ceramic Society of Japan, Vol. 29, No. 11, p. 967-970, (1994)
  8. (8) Haraya, K.: Gas Separation Process with Membrane, Membrane, Vol. 13, No. 2, p. 83-92, (1988), doi: 10.5360/membrane.13.83
  9. (9) Asano, K.,: Bussitsu Idou no Kiso to Ouyou, Fick no Housoku kara Taseibunkei Zyouryuu made, Maruzen Publishing Co., Ltd., p. 72-73, (2004) (in Japanese)
  10. (10) Asaeda, M.: Gas separation using inorganic porous solid membrane, Membrane, Vol. 10, No. 5, p. 297-304, (1985), doi: 10.5360/membrane.10.297
  11. (11) Chikazawa, M., Takei, T.: Adsorption and Capillary Condensation -Surface Structure and Properties of Condensed Liquid-, Hyomen Kagaku, Vol. 14, No. 9, p. 526-532, (1993), doi: 10.1380/jsssj.14.526
  12. (12) Asano, K.,: Bussitsu Idou no Kiso to Ouyou, Fick no Housoku kara Taseibunkei Zyouryuu made, Maruzen Publishing Co., Ltd., p. 122-123, (2004) (in Japanese)
  13. (13) Ozaki, H., Yamazaki, K., Ogawa, T., Maniwa, S., Miura, T., Huston, T. W.: Development of New Fuel Cell System, Honda R&D Technical Review Website, (2024)

Author (organization or company)

Publication Information

Article of Honda R&D Technical Review Vol.37 (56 - 65)

PDF

PDF 2MB

Citation Information

Shuto MANIWA, Yohei HIDAKA, Koichi KIMURA, Nobuki KOIWA.
Construction of One-dimensional Humidifier Model in Fuel Cell System
Honda R&D Technical Review Vol.37 pp.(56 - 65)2025.
Copy citation information
Copied